screw air compressor for laser cutting
XT LASER generally suggest that customers buy screw type oil-free air compressor, power is 7.5KW. The best pressure up to 9 kg (but also to achieve a minimum of 8 kg). The exhaust volume greater than 0.6 per minute. If the customer has bought the best oil air compressor with two oil filter. So as to reduce some water and dirty.
The fiber laser cutting machine needs to meet the cutting requirements of various materials and complex shapes. But it does not operate without a clean, dry, stable compressed air. The compressed air partly made up of high pure oxygen and high purity nitrogen to provide cutting gas to the cutting head. A part supplied to the cylinder of the clamping table as a power source. And the last part is used to blow and dust the optical path system.
From the air discharged from the compressed air through the dryer into the gas tank and gas control cabinet, through a sophisticated processing system, a gas clean and dry, and finally into the three road, were used as cutting gas cylinder, power source and light road dust gas pressure to maintain the normal operation of laser cutting machine.