Contact Us

Fax:+86-571-88220227

Mail:[email protected]

Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China

Gear and Racks

Gear racks are utilized to convert rotating movement into linear motion. A gear rack has straight teeth cut into one surface of a square or round section of rod and operates with a pinion, which is a small cylindrical gear meshing with the gear rack. Generally, gear rack and pinion are collectively called “rack and pinion”. There are many ways to use gears. For example, as shown in the picture, a gear is used with the gear rack to rotate a parallel shaft.
  • Gear Rack For Elevator

    Gear Rack For Elevator

    This is important in all kinds of mechanical transmission parts, tooth surface contact stress and friction under during operation, tooth root bending stress are, sometimes to withstand impact.So the gear has good comprehensive mechanical properties, generally choose forged...

  • Automatic Window Opening System Gear Rack

    Automatic Window Opening System Gear Rack

    The pinion involves mainly one gear, one galvanized sheet house, and two copper alloy bearing. Its gear is made from the technology of powder metallurgy, and is quenched. The gear has hard surface, and is strong. The gear is located in a galvanized sheet house, and is...

  • Gear Rack For Window Opener

    Gear Rack For Window Opener

    We are profesional Electric Window Opener Gear Racks, Electric Window Opener racks, Electric Window Opener rack gear factory from china, As per the material, we could supply in Mild Steel, Alloy Steel, HarMild Steel, Alloy Steel, Hardened and Tempered Steels, Case carburised,...

  • Gear Rack For Rack Actuator

    Gear Rack For Rack Actuator

    Units may be purchased assembled for quick installation, or as individual components for custom designs. V slides and flat tracks come in two grades; commercial for lower cost, or precision ground for higher accuracy applications. Gear racks can be added to single edge V...

  • Gear Rack For Railway Axle

    Gear Rack For Railway Axle

    Conventional railroads use the friction of wheels upon the rails, called "adhesion," to provide locomotive power. A cog, or rack, railroad uses a gear, or cog wheel, to mesh into a special center rack rail to climb much steeper grades than those possible with a standard...

  • Gear Rack For Automobile

    Gear Rack For Automobile

    A rack and pinion mechanism is used to transform rotary motion into linear motion and vice versa. A round spur gear, the pinion, meshes with a spur gear which has teeth set in a straight line, the rack. Rack and pinion gears are used to convert rotation into linear motion. A...

  • Automatic Door Rack

    Automatic Door Rack

    Automatic door closer to optionally install a compatible sliding door system. Piston with spring, which closes the door automatically and accompanied, when you reach the end of its journey

  • Gear Rack For Door Opener

    Gear Rack For Door Opener

    Can be used on most sliding gate openers. Proved to be highly successful in operation. There are fixing points on each section length with proper slots and protruding lip to slide securely in to the slot on the next section of rack. Comes complete with fixing screws (...

  • Gear Rack For Construction Machinery

    Gear Rack For Construction Machinery

    This is important in all kinds of mechanical transmission parts, tooth surface contact stress and friction under during operation, tooth root bending stress are, sometimes to withstand impact.So the gear has good comprehensive mechanical properties, generally choose forged...

  • Gear Rack For Material Handling Industry

    Gear Rack For Material Handling Industry

    Often, gear rack is modified to fit specific applications. This may include drilling and tapping mounting holes, cutting to specific lengths or matching ends of two pieces of rack to create a continuous length longer than stock.

  • Gear Rack For Woodworking Industry

    Gear Rack For Woodworking Industry

    A split-pinion and servo-worm reducer were used with the integrated rack to provide a precision axis drive. The manufacturer was able to achieve very accurate results in their finished parts.

  • Gear Rack For Machine Tool Industry

    Gear Rack For Machine Tool Industry

    These systems are well-established linear drive mechanisms, providing high-speed travel over extremely long lengths. They are frequently used in large gantry systems for material handling, machining, welding and assembly, especially in the automotive, machine tool, and...

First Prev 1234567 Next Last 1/8
As one of the most professional gear and racks manufacturers and suppliers in China, we warmly welcome you to buy or wholesale bulk gear and racks made in China here from our factory.