Motorized Drum Roller
Motorized Drum Roller FOR BELT CONVEYORS SYSTEMS SIZE 72 DIA.
We can supply motorized drums with special voltage, in stainless steel, or rubber lagging.
The motorized drums for conveyor systems type RL 072,
MT 080, MT80S, MT 113, MT 113S,
products specially designed for motorizing conveyor systems
thanks to their easy assemblance and for their integration
into the conveyor.
OPERATION & MAINTENANCE
To install and work with motorized drums the following
instructions must be complied:
Motorized drums should normally be mounted horizontally
Motorized drums must not be
form of approved heat transfer system.
motorized drums must be dissipated,
damage may occur to the transmission
The conical tube insures the belt works centered
When Its are assembled in brackets
allow a gap ( 0.3 – 0.5 mm)between the end
The belt should be adjusted just
load without slip.
Ensure the correct connection in accordance with the electrical
To protect the motor from burning.
Diámetro : Ø72 mm
Velocidades : desde 2,6 hasta 46,9 m/min
Longitudes : desde 250 hasta 1.000 mm
Rated Speed : from 2,6 until 46,9 m/min
Shell Length : from 250 until 1.000 mm
• Asynchronous motor AC Three
• Insulation F Class.
• Lifetime Lubrication.
• Free Maintenance.
• Integral Thermal
• Planetary Gearbox with Steel Gears and Gear
• Protection IP 54 or IP 66.
• Ambient Temperature
• Zinc Coated Steel Shell.
• ANSI 304 Stainless Steel Shell.
• Geometry of Tub
• Rubber Lagging Tube.
• Special Voltages of Motors.
• Brake motor.
• Different possibilities of Cable Connection.
• Light Conveyors.
• Special Machines.
• Packaging Machines.
• EN 60034 - 1.