Contact Us
Fax:+86-571-88220227
Mail:[email protected]
Add:No. 2, Longshen Cdc, Sandun Town, Hangzhou, Zhejiang, China
How to install and arrange the geared motor
Geared motors are characterized by high efficiency and reliability, long working life, easy maintenance, and wide application. Its number of stages can be divided into single-stage, two-stage and three-stage gear reducer motors, and the main installation and layout methods are expansion, coaxial and shunt.
1. In the expansion type of the two-stage cylindrical gear motor, the gear is asymmetric with respect to the supporting position. When the shaft is deformed by bending and torsion, the load is unevenly distributed in the tooth width. Therefore, the shaft should be designed with greater rigidity and keep the gear away from the input Terminal or output terminal.
2. The shunt type characteristics of the two-stage cylindrical gear motor: the position of the extension shaft of the shunt gear motor can be extended from any side, which is convenient for the overall configuration of the machine. The gears of the shunt stage are processed into helical teeth, with one side rotating right and the other Turn left to counteract the axial force. One of the shafts should be able to move slightly in the axial direction to avoid jamming the gears.
3. Features of coaxial geared motors: compact radial size, but larger axial size. Due to the large intermediate shaft, the shaft has greater disturbance when under load, so the load concentration along the tooth width is more serious. At the same time, since the centers of the two-stage gears must be consistent, it is difficult to fully utilize the load-carrying capacity of the high-speed gears, and it is also difficult to lubricate the bearings in the middle of the geared motor. The input end and output end of the geared motor are located at the two ends of the same axis, which limits the overall configuration of the transmission device.
Previous: Speed control method of geared motor
Related Industry Knowledge
- Gear manufacturer's production process
- Mechanical parts that transmit motion
- Analysis of sprocket manufacturers:...
- The bearing capacity of the gear ma...
- Working principle of speed changer
- The difference between inverter and...
- Use and maintenance of cycloid reducer
- Helical gear reducer relative to th...
- Some failures of the reducer during...
- Speed control method of geared motor
- Definition of geared motor
- How to maintain the reducer
- What are the classifications of the...
- Features of reducer
- Four precautions for structural des...
- Rotary vane vacuum pump
- Water ring vacuum pump
- The cost of dry pumps
- Liquid ring pumps can be divided in...
- Classification of vacuum pumps