Gear

• 

  Automobile Gears

  The gearbox is the second stage in the transmission system, after the clutch . It is usually bolted to the rear of the engine , with the clutch between them. Modern cars with manual transmissions have four or five forward speeds and one reverse, as well as a neutral position....

• 

  Ratchets Wheel

  A rachet involves a round gear or a linear rack with teeth, and a pivoting, spring-loaded finger called a pawl that engages the teeth. The teeth are uniform but asymmetrical, with each tooth having a moderate slope on one edge and a much steeper slope on the other edge. When...

• 

  Aluminum Gearbox

  Our Aluminum series right angle worm gear reducers are designed with metric center distances and quill style motor input flanges which allow users a much greater supply of off-the-shelf standard motor input choices. Metric center distances allow for easy installation into...

• 

  Plastic Spur Gears

  Plastic gearing has been increasing in usage as designers better understand their benefits and limitations. These gears can be produced by hobbing or stamping or, for large-volume runs, by injection molding. Some of the key benefits of plastics in the production of gearing...

• 

  Pinion Shafts

  When the number of teeth required to achieve a given ratio becomes so small that the gear cannot have a bore, it is necessary to use a pinion shaft. XLT offers 303 stainless steel spur pinion shafts in a solid-on-shaft configuration with small numbers of teeth for...

• 

  Gear Shaft

  Gear shafts often incorporate counter faces for radial shaft seal rings. Typical for these surfaces is the specification "ground twist-free". The so-called twist on counter faces for radial shaft seal rings (RWDR) can cause leakage. For example, the surface which is...

• 

  Spline Bushings

  SPLINED SHAFTS AND BUSHINGS At XLT, we offer custom manufacturing and engineering of involute, splined shafts and bushings including: Flat-root, side-fit: This type of splined shaft has a marginally, greater minor(male) diameter and a lesser, major(female) diameter....

• 

  Spline Shaft

  XLT Standard Spline Shafting has been designed to maximize torsional strength and contact area. XLT cold rolled spline shafts are made with an even number of teeth and are parallel over two or more teeth. When your project requires mating parts, look no further....

• 

  Ring Gear

  manufactures tight tolerance precision ring gears to your specifications. We have created custom ring gears for both OEM and aftermarket applications, and can produce the most complex ring gear designs. We work to your specifications and all critical contact surfaces are held...

• 

  Spur Gear

  Spur gears are a type of cylindrical gear, with shafts that are parallel and coplanar, and teeth that are straight and oriented parallel to the shafts. They’re arguably the simplest and most common type of gear - easy to manufacture and suitable for an array of applications....

• 

  Helical Gear

  Helical Gears Unlike Spur gears, Helical gears and Helical Gearbox both have the capacity to conduct a smooth operation. The teeth on a helical gear cut at an angle to the face of the gear. So, during the process when two of the teeth start to engage, the contact is gradual-...

• 

  Spiral Bevel Gear

  What Are Spiral Bevel Gears? Spiral Bevel Gears Are Sold In Pairs, And Are Designed To Allow For The Conversion Of Gear Speeds Though A 90° Drivetrain. The Helical Tooth Layout Of These Gears Allows Each Tooth To Engage Gradually, Resulting In Smooth Transmission And...