Gear Speed Reducer

The gear reducer is a power transmission mechanism that uses a gear speed converter to decelerate the number of revolutions of the motor to a desired number of revolutions and obtain a mechanism for a large torque.

The utility model has the advantages of compact structure, small volume, stable operation, wide selection range of output speed, strong versatility and high efficiency of 95%.

M Series Industrial Gear Box

Performance characteristics

◆ M series industrial gear box to adopt a common design, according to customer demand for industry-specific variant of the gear box.

◆ achieve parallel shaft, DC-axis, vertical, horizontal tank general, the types of parts and components to reduce, increase in model specifications.

◆ Cabinet to use sound-absorbing structure, a larger surface area and the fan box, cylinder gear and spiral bevel gears are grinding the use of advanced technology, so that the whole temperature rise, noise reduction to improve the reliability of operation, transmission power increased.

◆ input: motor connected flange, shaft input.

◆ output: ping bond with a solid shaft with flat key of the hollow shaft, swelling of the hollow shaft connection plate, the hollow spline shaft connection, linking the solid spline shaft and flange connection of the solid shaft

Technical parameters:

◆ Installation: horizontal, vertical, swing base-type, torsion arm.

◆ M Series products are 3 to 26 specifications, transmission speed series 1 ~ 4, 1.25 ratio ~ 450.

◆ and CR, K, S series combination of greater speed ratio.

◆ ratio gear box industry-specific reference range 1.25-450 torque 2.6-900kN

4-5000kW power range

P series planetary gear reducer

Performance characteristics

vertical output, compact structure, big torque transmission hardened, high-precision gears to ensure smooth working, low noise, long life.

installation: at the end of the foot to install, the installation of the hollow shaft, flange installation, torque arm installation, the installation of the small flange.

Input Method: Direct motor, motor or a belt connected to input shaft, input flange connection.

output mode: Hollow shaft output or solid output shaft, with an average efficiency of 98%.

mix ratio can be greater.

Technical parameters

Transmission ratio :3.15-3000

Input Power :0.25-550kw

Maximum torque: 2000KN.M

Output speed :0.45-445r / min